09/01/2024
Introducing a NEW dimension to Non-Destructive Testing – Neutronis As a global leader for low-level signal detectors and owner of a patented technology for neutron imaging, Photonis introduces Neutronis: a work-in-progress demonstrator based on proven MCP technology derived from night vision and mass spectrometry applications. The Neutronis will be a complimentary diagnostic tool to x-ray technology, providing you with the information you are missing today suc...
09/01/2024
Boost your camera sensitivity with Cricket™² Integrating an Image Intensifier in a scientific set up is a rather complex and time consuming task for scientists, researchers and instruments builders. For you to focus on science instead of struggling with a complex set up, Photonis development teams have created a plug and play image intensifier adapter solution for low light level imaging and single photon imaging applications: the C...
05/01/2024
TOF Detector Performance Versatile, Long-Lifetime, Wide Dynamic Range Detector for TOF Applications.TOF detector specifications are a major factor in tool performance.Key criteria are:Timing: faster detector and electronics Improved Mass ResolutionOutput range: high saturation values, better linearity Wider dynamic range, single gain working point.Gain: unambiguous detection of single ion over backgro...
03/01/2024
ISO 9001 - Exosens Scientific USA, Inc.
06/12/2023
ISO 9001 - Xenics NVThe ISO 9001 certificate for Xenics NV
06/12/2023
Lynx CL: How to optimize line rateIn this video we show you how to optimize line rate for the Lynx CL cameras.
06/12/2023
ISO 9001 - sInfraRed Pte LtdThe ISO 9001 certificate for sInfraRed Pte Ltd.
06/12/2023
Lynx CL: How to use line and frame triggerIn this video we show how to use the line and frame trigger for the Lynx CL cameras.
06/12/2023
Cheetah (1700 Hz): How to make a NUC fileWe show you how to make and upload a NUC file for the Cheetah camera (1700 Hz).
06/12/2023
Cheetah (400 & 800 Hz): How to make a NUC fileWe show you how to make and upload a NUC file for the Cheetah camera(400 & 800 Hz).
06/12/2023
Bobcat GigE: How to use NUC files in camera memoryIn this video, we walk you through the steps involved in order to use NUC files in camera memory for the Bobcat GigE camera.
06/12/2023
How to setup frame grabberIn this video, we show you how to get setup the frame grabber for your camera.
06/12/2023
How to record a movie in xvi formatIn this video, we show you how to record a movie in xvi format, as well as converting it to avi.
06/12/2023
How to recalibrate for offsetIn this video, we show you how you can re-calibrate offsets for the majority of Xenics cameras.
06/12/2023
How to make a NUC fileIn this video, we show you how to create a NUC file for the majority of our Xenics cameras.