Bibliothèque de ressources

Accédez à toute notre documentation depuis cette page

21/07/2026

Tracking Thermal Localization and Pre-Fracture Propagation During Tensile Testing A Telops Radia V60 long-wave infrared (LWIR) camera, was used to measure full-field thermal signatures during two quasi-static tensile tests. Two dog-bone metal alloy specimens were monitored during uniaxial loading in which thermoelastic cooling, localized heat generation, the onset of plasticity, and shear-band development were observed, and the image-derived localized nucleus propagation vel...
Application Note
504.36 Ko pdf

21/07/2026

Thermal Localization and Recovery of 3D-printed TPU Under Cyclic Compressive Loading

Infrared thermography provides a simple and effective way to visualize temperature changes during mechanical loading. In this application note, a Radia V60 long-wave infrared camera was used to measure the surface temperature response of three 3D-printed thermoplastic polyurethane (TPU) specimens under cyclic compressive loading.

Application Note
740.06 Ko pdf

20/01/2026

High Speed IR Imaging for Defense Applications

Modern defense research demands precise infrared (IR) characterization of fast, complex events, ranging from explosive tests and projectile launches to equipment reliability studies and signature analysis.

Application Note
304.93 Ko pdf

20/01/2026

Telops HDR Data Management Engine

The Telops HDR M700 is a first-of-its-kind, next-generation high dynamic range IR imaging platform, built upon an allnew 23-bit digital readout integrated circuit (DROIC).

Application Note
379.03 Ko pdf

20/01/2026

Telops Next-Generation HDR Series Vs. Superframing or EHDRI

Telops Next-Generation High Dynamic Range (HDR) cameras utilize unique on-chip saturation management capabilities to tolerate significant variations in infrared photon flux from scene constituents displaying strong thermal contrast.

Application Note
308.25 Ko pdf

20/01/2026

How to Choose an IR Camera: High Dynamic Range

Dynamic applications often push infrared cameras to their limits, demanding precise radiometric measurements across highly varied and rapidly changing scenes.

Application Note
231.21 Ko pdf

20/01/2026

Calibration and Emissivity

Calibrations are fundamental to obtaining accurate quantitative radiometric data from infrared (IR) cameras. As thermal assessment needs increase across research and engineering fields, understanding the nuances of detector performance, calibration methodology, and emissivity effects becomes essential.

Application Note
225.99 Ko pdf

20/01/2026

New Scientific Infrared Signature Measurement Tools from Telops

Telops understands that research groups studying infrared signature must continuously adapt and improve their imaging capabilities as they work to provide new insight and acquire unique and often difficult to capture infrared targets and phenomena.

Application Note
396.95 Ko pdf

21/08/2025

An algorithm for obtaining surface emissivity spectra and surface skin temperature measurements from ASSIST surface and sky radiance observations is presented. Methane emissions are a major concern for the oil and gas industry, with increasing regulatory pressure to monitor and mitigate their environmental impact. The Telops Methane Airborne Detection Solution provides a state-ofthe-art, cost-effective approach to addressing these challenges, offering unparalleled capabilities for detecting methane and other gaseous hydrocarbons—even in complex enviro...
Application Note
344.14 Ko pdf

21/08/2025

ASSIST What is TROPoe

TROPoe (Tropospheric Remotely Observed Profiling via optimal estimation) is a robust retrieval system reading in downwelling radiance spectra collected by an ASSIST (AERI) Infrared Spectrometer (IRS), and providing high temporal resolution thermodynamic profiles (temperature and water vapor mixing ratio vs height

Application Note
372.71 Ko pdf